These 90º Sweep Snap-In Nylon Liquid Tight Fittings are cost-saving and UL approved for use with Flexible PVC Liquid Tight Tubing found in the "Conduit/Tubing" section of the our Electrical Engineering Guide. They are available in 3 sizes; 3/8", 1/2", and 3/4", and provide a low-cost, one-piece solution with smooth internal surfaces for easier wire routing, protection and installation. Their all- Nylon 6/6 construction is resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents (note: this feature is not assessed by the UL certification and testing). Optional Collars (Black and Gray) are also available, to neaten rough cut tubing ends, and are listed below. Locknuts are listed in the "Liquid Tight Locknuts" section of our Electrical catalog.
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1 

Item #

Item Name

Mounting Hole Diameter

Body Length

Maximum Overall Length

20300267-A030 N/A 0.875 Inch (in) Mounting Hole Diameter 90 Degree Sweep Snap-In Nylon Liquid Tight Fitting N/A 0.875 in22.20 mm N/A 0.390 in9.90 mm N/A 2.749 in69.80 mm
20300267-A070 N/A 0.875 Inch (in) Mounting Hole Diameter 90 Degree Sweep Snap-In Nylon Liquid Tight Fitting N/A 0.875 in22.20 mm N/A 0.390 in9.90 mm N/A 2.749 in69.80 mm
20300268-A030 N/A 0.875 Inch (in) Mounting Hole Diameter 90 Degree Sweep Snap-In Nylon Liquid Tight Fitting N/A 0.875 in22.20 mm N/A 0.390 in9.90 mm N/A 2.749 in69.80 mm
20300268-A070 N/A 0.875 Inch (in) Mounting Hole Diameter 90 Degree Sweep Snap-In Nylon Liquid Tight Fitting N/A 0.875 in22.20 mm N/A 0.390 in9.90 mm N/A 2.749 in69.80 mm
20300269-A030 N/A 1.093 Inch (in) Mounting Hole Diameter 90 Degree Sweep Snap-In Nylon Liquid Tight Fitting N/A 1.093 in27.80 mm N/A 0.390 in9.90 mm N/A 3.081 in78.30 mm
20300269-A070 N/A 1.093 Inch (in) Mounting Hole Diameter 90 Degree Sweep Snap-In Nylon Liquid Tight Fitting N/A 1.093 in27.80 mm N/A 0.390 in9.90 mm N/A 3.081 in78.30 mm
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1 
Product Catalog