This RDD Hole Punch for RDD Strain Reliefs punches a mounting hole configured specifically for RDD Strain Reliefs. This tool can be used to punch mounting holes for several different strain reliefs in the RDD Lockit™ family. Those strain reliefs are featured under the "Strain Reliefs for Wire/Cable" section of the "Wiring Management" product category.
1 - 11 of 11 | Results Per Page | View | Unit of Measure
1 

Item #

Item Name

Across Flats

Mounting Hole Diameter

Draw Stud

70008053 N/A 0.875 Inch (in) Mounting Hole Diameter RDD Hole Punch N/A 0.840 in21.30 mm N/A 0.875 in22.20 mm N/A 0.437 in11.10 mm
20300069-TLI N/A 0.375 Inch (in) Mounting Hole Diameter RDD Hole Punch N/A 0.330 in8.40 mm N/A 0.375 in9.50 mm N/A 0.250 in6.35 mm
20300076-TLI N/A 0.500 Inch (in) Mounting Hole Diameter RDD Hole Punch N/A 0.465 in11.80 mm N/A 0.500 in12.70 mm N/A 0.312 in7.92 mm
20301031-TL N/A 0.375 Inch (in) Mounting Hole Diameter RDD Hole Punch N/A 0.345 in8.80 mm N/A 0.375 in9.50 mm N/A 0.250 in6.35 mm
20301032-TL N/A 0.437 Inch (in) Mounting Hole Diameter RDD Hole Punch N/A 0.390 in9.90 mm N/A 0.437 in11.10 mm N/A 0.250 in6.35 mm
20301039-TL N/A 0.500 Inch (in) Mounting Hole Diameter RDD Hole Punch N/A 0.460 in11.70 mm N/A 0.500 in12.70 mm N/A 0.312 in7.92 mm
20301041-TL N/A 0.562 Inch (in) Mounting Hole Diameter RDD Hole Punch N/A 0.530 in13.50 mm N/A 0.562 in14.30 mm N/A 0.375 in9.53 mm
20301197-TL N/A 0.875 Inch (in) Mounting Hole Diameter RDD Hole Punch N/A 0.770 in19.60 mm N/A 0.875 in22.20 mm N/A 0.437 in11.10 mm
20652008-0000I N/A 0.500 Inch (in) Mounting Hole Diameter RDD Hole Punch N/A 0.450 in11.40 mm N/A 0.500 in12.70 mm N/A 0.312 in7.92 mm
20791002-TLI N/A 0.750 Inch (in) Mounting Hole Diameter RDD Hole Punch N/A 0.660 in16.80 mm N/A 0.750 in19.00 mm N/A 0.437 in11.10 mm
20900034-6TL N/A 0.625 Inch (in) Mounting Hole Diameter RDD Hole Punch N/A 0.550 in14.00 mm N/A 0.625 in15.90 mm N/A 0.375 in9.53 mm
1 - 11 of 11 | Results Per Page | View | Unit of Measure
1 
Product Catalog