These Klamp-tite Protruding Head Rivets have an external locking feature that requires a special nose tip. This rivet provides good vibration resistance and exceptional clamp-up strength for a wide grip range. Three-leg formation compensates for oversized or irregular holes. There are two styles available-one with protruding head, and one with countersunk head. If your application requires a style or size not available on this page, please contact EFC International for more information.
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1 

Item #

Item Name

Hole Size

Nominal Rivet Diameter

Maximum Rivet Length L

E26007640001 N/A Klamp Tite® 0.890 Inch (in) Maximum Length L Protruding Head Breakstem Rivet N/A 0.204 to 0.209 in N/A 3/16 in N/A 0.890 in
E26007640002 N/A Klamp Tite® 0.985 Inch (in) Maximum Length L Protruding Head Breakstem Rivet N/A 0.204 to 0.209 in N/A 3/16 in N/A 0.985 in
E26007640003 N/A Klamp Tite® 1.120 Inch (in) Maximum Length L Protruding Head Breakstem Rivet N/A 0.204 to 0.209 in N/A 3/16 in N/A 1.120 in
E26007640004 N/A Klamp Tite® 1.300 Inch (in) Maximum Length L Protruding Head Breakstem Rivet N/A 0.204 to 0.209 in N/A 3/16 in N/A 1.300 in
E26007640005 N/A Klamp Tite® 0.925 Inch (in) Maximum Length L Protruding Head Breakstem Rivet N/A 0.252 to 0.262 in N/A 1/4 in N/A 0.925 in
E26007640006 N/A Klamp Tite® 1.050 Inch (in) Maximum Length L Protruding Head Breakstem Rivet N/A 0.252 to 0.262 in N/A 1/4 in N/A 1.050 in
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1 
Product Catalog