• Adjustable Push Mount Cable Straps

    Adjustable Cable Straps are made of durable polyethylene. The straps can bundle wire or cables in various diameters. Designed with two snap-in prongs to fit hole sizes of 0.205-0.265 inches, these cable straps will snap into a panel range from 0.031-0.140. The four to seven holes are molded so the strap is adjustable for varied bundling capabilities.

  • All Cable Clips with Ties

    All Cable Clips with Ties are manufactured out of high quality nylon or acetyl materials and are available in assorted tube diameters and bundle sizes. These components accommodate a wide range of tube or wire bundle diameters. Wire management solutions combine cable tie straps with additional features to attach to panels or other components

    Edge clips, also called "Edge Biters", are assemblies designed specifically to route bundles by securing them to the edge of a plastic or metal sheet or panel without a mounting hole. The clip secures easily and extraction force is high due to an integrated metal clamp that holds the edge clip in place. Edge Biters are available in a variety of configurations and designs

  • Black Nylon Tie Strap Assortment Kits

    The Black Nylon Tie Strap Assortment Kit ships in 6 hole plastic tray containing 6 different tie sizes and a total of 310 total pieces.

  • Bottom Load Push Mount Wire Clips

    Bottom Load Push Mount Wire Clips are a one-piece solution for your wire or cable requirements. The clips will hold bundle diameters starting at 0.250" up to 0.750". All of these clips require a predrilled hole diameter of 0.250". Each clip will mount into a panel range of 0.030" to 0.125".

  • Dart Type Push Mount Cable Tie Holders

    Dart Type Push Mount Cable Tie Holders are designed to be inserted from the front side of a panel as the fastening aspect of mounting a wire tie to a bundle of wires.

  • Dart Type Standoff Push Mount Twist Ties

    Simply open the twist, insert the wires or cables, close the twist and insert the dart-type push mount into a pre-drilled hole to secure wires or cable in your application.

  • Dart Type Standoff Push Mount Twist Ties Fits in 0.217 Inch (in) Diameter Hole

    These Dart Type Standoff Push Mount Twist Ties fit in a 0.217 diameter (±0.0003) hole, in panels from 031" to 0.078" thick. We offer the standoff lengths starting at 3/1" in length up to 1 1/4". Bundle diameters starting at 0.200 up to 0.800. You simply open the twist, insert your wires or cables, close the twist and insert the dart type push mount into your pre-drilled 0.217 hole and your wires or cable are secure in your application.

  • Extra-Large Push Mount Standoff Harness Cable Clips

    These Extra-Large Push Mount Standoff Harness Cable Clips are ideal when you need a large standoff for a large bundle diameter. They are top loading, and come in 2 different heights.

  • HeyClip™ Lockit™ Cable Clips with a Hinged Locking Top

    HeyClip™ Lockit™ Cable Clips with a Hinged Locking Top are the perfect choice for low-profile applications. Their unique locking design snap-locks the wire saddle for up to a 0.063 panel thickness. Wire Saddles, as they are commonly called, are ideal for routing single wires, fiber optic cable, or bundles and the hinge eases insertion with no danger of crimping.

  • Metal Plug Mount Cable Clips with Dart

    Metal Cable Clips with a plug mount work like Bundle/Tube Edge Biter Clips; however, instead of the barbs retaining the clip to the panel, the part is assembled by pushing a dart clip through a hole or slot in a panel. The hose retaining feature can accommodate one tube or multiple smaller tubes, wires and/or cables.

  • Push Mount Closed Loop Wire Clips

    Push Mount Closed Loop Wire Clips are made of Nylon 6/6. Available in natural as a standard color, other colors may be ordered and minimums may apply. These clips hold wires and cables securely to your panel. *Illustration is a representation of the clip.

  • Push Mount Fiber Optic Wire Clips

    The PUSH MOUNT FIBER OPTIC WIRE CLIP is a miniature wire clip ideal for routing 900 micron fiber optic cable. Snapping into a 0.040" diameter mounting hole in a 0.040" thick panel, it can hold up to three 900 micron fibers. Its unique teardrop mounting style provides a strong, secure lock to your panel. It has a low profile "pico" saddle and is manufactured using the latest injection-molding exclusively designed for miniature components with very tight tolerances.

  • Push Mount Locking Multi-Wire Clips

    Push Mount Locking Multi-Wire Clips easily snap into the hole, while a snaplock secures multiple wires in place. They can be unlocked to easily change wire configurations. Locking Multi-Wire Clips are made of Nylon 6/6 and are available in natural as a standard, however other colors are available and minimums may apply.

  • Push Mount Routing Clips with Off-Center Prong

    This Push Mount Routing Clip with Off-Center Prong is ideal for applications where any spinning of the clip would be a problem. It is Top Loading.

  • Push Mount Standoff Harness/Cable Clips

    This version of Push Mount Standoff Harness/Cable Clips holds bundle diameters of 0.215" (max), approximately 0.600" above the panel. It will fit a predrilled hole diameter of 0.187" - 0.192". The panel range is 0.015 to 0.070. These tubular clips are designed of rugged nylon material.

  • Push Mount Tube Clips

    Push Mount Tube Clips hold tubular parts from 0.495" to 0.812" diameter. They will easily snap into either round or square holes (0.250" diameter), in panels 0.030" to 0.125" thick.

  • Push Mount Wire Saddles with Hinged Locking Top

    Push Mount Wire Saddles with Hinged Locking Top easily snap into place and hold your wires securely "locked" into place. Yet they may also be unlocked easily to change wire configurations. These clips are available in various sizes, with panel ranges for varying from 0.020 to 0.079 inches.

  • Quick Snap Push Mount Wire Clips with Seal

    Quick Snap Push Mount Wire Clip with a Seal provides a swift and easy way to attach and secure wires to a panel. As the wires are pressed down into place, the Quick Snap Push Mount closes and locks into position.

  • Rectangular Shaped Push Mounts

    Rectangular Shaped Push Mounts are made of Nylon 6/6 in a standard natural color. These top-loading wire routing clips securely hold your wires and cables to your panel. EFC International offers three versions of this clip to suit your application needs.

  • Round Push Mount Locking Wire Clips

    Round Push Mount Locking Wire Clips are also called Snap-In W-Prong Wire Routing Clips. An overlapping inner liner locks in wire bundles and prevents fall-out. Bundle sizes range from 0.620 to 1.500 inches. These top-loading wire clips mount into a predrilled 0.250 inch hole. Wires or cables are then simply pushed into the opening at the top of the clip.

  • Round Push Mount Routing Clips

    Round Push Mount Routing Clips securely hold multiple wires. Also known as Harness Clips, this variation is side-loading with a canoe prong.

  • Snap Lock Push Mount Wire Clips with X-Mas Tree Base

    Snap Lock Push Mount Wire Clips with X-Mas Tree Base enable one snap-in clip to lock in different bundle diameters and reduce the number of parts required for assemblies. These parts are available with 2 prong styles, and both have an umbrella for a secure fit. They will hold a bundle diameter of 0.350 or 0.472 inches.

  • Standoff Push Mount Twist Ties with Tree Base

    These Standoff Push Mount Twist Ties with Tree Bases will hold bundle diameters from 0.375 up to 0.625 and they have a standoff range from 0.200 of clearance to 0.942. The tree design easily presses into a hole that locks your bundle in your panel. Panel ranges are from 0.031 up to 0.250. Standard Length is from Bundle Diameter to top of 1/32" Panel.

  • Standoff Twist Ties with Tree Base

    Standoff Twist Ties with a Tree Base will hold diameters from 0.400 up to 1.200 with standoff dimension of 0.125 clearance up to 0.937. The Tree design will easily press into a hole that locks the part in your panel. Minimum panel thickness range of 0.055.

  • Stud Mount Cable Ties

    Stud Mount Cable Ties provide superior holding ability on a threaded stud. They self-lock onto the threads of a screw or stud with no nut required. Like standard cable ties, they are available in a wide range bundle diameters to secure wire, cable and tubes.

  • Swivel Clips

    Swivel clips provide complete 360° rotation for infinite and independent mounting possibilities. Each two-component assembly rotates with respect to one another and can accommodate different panel sizes and orientations, eliminating the number of fasteners required for a given application, process or installation. By mixing and matching components, unique solutions can be created: cable tie strap with fir tree, double cable tie strap, cable tie strap with edge clip or tape-on, cable tie strap with c-clip, double c-clip, and more.

Product Catalog