• Cable Clips

    Metal Cable Clips are spring clips that secure cable, wire and tubing safely away from dangerous areas. These one piece, self-retaining routing fasteners require only a mounting hole and will easily slip over your flange end or panel edge.

  • Elbow Washer Connectors

    Elbow Washer Connectors are designed for liquid, pressure, vacuum or RF applications. They are used to connect:

    • Transfer hoses
    • Lines
    • Tubing and flexible or rigid vacuum jacketed pipe
    • Coax

  • Hydraulic Drive Fit Grease Fittings

    • High quality steel, case hardened and plated to pass rigorous corrosion tests and extend life.
    • Zinc Plated with Yellow Dichromate
    • Case-Hardened for extended tip durability
    • Carbon Steel Spring is Heat Treated after coiling for maximum performance & durability
    • Meet or Exceed world standards for corrosion protection
    • Meet or Exceed appropriate SAE & DIN requirements, including Hardness & Durability

  • Normaplast® SV Cross-Type Push-On Hose Connectors

    • High Strength
    • Toughness
    • Low Weight
    • Shock Dampening
    • Scuff resistant
    • High Impact resistance

  • Normaplast® SV Elbow Tapered Threaded Hose Connectors

    These Elbow Tapered Threaded Connectors feature a tapered thread on one end and a push-on spigot on the other. They are made of Polyamide 6.

  • Normaplast® SV Elbow Type Push-On Hose Connectors

    Normaplast® SV Elbow Push On Connectors connect hoses of differing diameters. They are made from ecru-colored Acetalcopolymeristat (POM) and connect pipes quickly and easily. The ribbed push-on spigot ensures a tight fit after assembly.

  • Normaplast® SV Equal T-Type Push-On Hose Connectors

    NORMAPLAST® SV PUSH ON EQUAL T-TYPE CONNECTORS connect hoses in a T-Type configuration. They are made from ecru-colored Acetalcopolymeristat (POM) and connect pipes quickly and easily. The ribbed push-on spigots ensure a tight fit after assembly.

  • Normaplast® SV Straight Push-On Hose Connectors

    Normaplast® SV Straight Push On Connectors are made from Acetalcopolymeristat (POM) and connect pipes made from PA6 or PA12.

  • Normaplast® SV Straight Push-On Hose Connectors for PA6 OR PA12 Pipes

    Normaplast® SV Straight Plastic Pipe Connectors safely link pipes made from PA6 or PA12, even without additional hose clamps. They are made from Black Polyamide 6 or Polyamide 12 containing 30% glass fiber-reinforcement. O-Rings are available on request.

  • Normaplast® SV Straight Reducing Push-On Hose Connectors

    Normaplast® SV Straight Push On Reducing Connectors connect hoses of differing diameters. They are made from ecru-colored Acetalcopolymeristat (POM) and connect pipes quickly and easily. The ribbed push-on spigot ensures a tight fit after assembly.

  • Normaplast® SV T-Type Reducing Hose Connectors

    Normaplast® SV T-Type Push On Reducing Connectors connect hoses of differing diameters in a T-shaped configuration. They are made from ecru-colored Acetalcopolymeristat (POM) and connect pipes quickly and easily. The ribbed push-on spigot ensures a tight fit after assembly.

  • Normaplast® SV T-Type Tapered Threaded Hose Connectors

    Normaplast® SV T-Type Tapered Threaded Connectors connect fluid-carrying hose or tubing reliably and efficiently. These are available in Metric, Whitworth or NPT tapered threads, each identified by color coding. The 2 push-on spigot ends are ribbed for a tight fit on the hose after assembly. They are made from Polyamide 6 nylon.

  • Normaplast® SV Y-Type Equal Push-On Hose Connectors

    Normaplast® SV Equal Y-Type Push On Connectors connect hoses in a Y-shaped configuration. They are made from ecru-colored Acetalcopolymeristat (POM) and connect pipes quickly and easily. The ribbed push-on spigot ensures a tight fit after assembly.

  • Normaplast® SV Y-Type Reducing Push-On Hose Connectors

    Normaplast® SV Y-Type Push On Reducing Connectors connect hoses of differing diameters in a Y-shaped configuration. They are made from ecru-colored Acetalcopolymeristat (POM) and connect pipes quickly and easily. The ribbed push-on spigots ensures a tight fit after assembly.

  • Normaplast® SVT-Type Pipe Connectors

    T-Type Normaplast® SV Pipe Connectors safely link plastic pipes made from PA6 or PA12, even without additional hose clamps. They are made from Black Polyamide 6 or Polyamide 12 containing 30% glass fiber reinforcement. O-Rings are available on request.

  • Nylon Vent Plugs

    Nylon Vent Plugs permit the passage of air for ventilation and heat dissipation. They are available in sixteen sizes for use in 1/2" (12.70 mm) to 4" (101.60 mm) diameter holes.

  • Oil Drain Valves

    These patent-pending Oil Drain Valves can be used by OEM's and aftermarket industries to replace oil drain plugs. The standard valve has 3/8-18NPT threads and can be customized for other thread sizes.

  • One Tube Panel Center Edge Mount Cable Clips

    Metal Cable Clips are spring clips that offer the most efficient means of securing cable, wire and tubing safely away from dangerous areas. They are one-piece, self-retaining and reusable. Parts listed on this page insert easily into your mounting hole. Simply position the clip in the mounting hole, then push to snap into place in the panel hole to provide positive retention for reliable service.

  • Quick Connector Assemblies

    Quick Connectors for fluid transfer are widely used in applications for automobiles and heavy trucks, off-road and recreational vehicles, marine, and industrial and residential products from HVACR to utilities and much more. They improve the quality of the joints between hoses and tubes, are often reusable and can be integrated with valves, regulators and sensors, to name a few. Quick Connectors are manufactured in a variety of PA and PPA nylons to meet conductive and non-conductive specifications.

  • Slide on Flat Tree Clips

    Slide On Flat Tree Clips are easy-to-use wire and tubing management solutions. The pine tree fastener base offers low insertion force, while a round or flat clip snaps over harnesses, cables, hoses, tubing and wires to keep them securely in place.

  • Snap over Tree Clips
  • Straight, Elbow, and Tee Unions
  • Valve-Free 1/2 Inch (in) DN11 H Series Swing Couplings

    These valve-free 1/2" DN11 H Series Swing Couplings provide a fast and easy connection and guarantee free flow in a compact, easy to manage design. A simple turn activates an air vent to provide ventilation and safety to the hose. These new-generation Couplings are available in nominal sizes DN6 - DN11, DN11 featured here, and are compatible with most common plug systems (parts listed on this page fit the plug style pictured). They meet safety standard requirements and earned certificates listed. Increase the safety and efficiency of your operations and reduce your energy consumption with this economical choice. "Safely Swing to Connect!".

  • Valve-Free 1/4 Inch (in) DN6 A1 Series Swing Couplings

    These valve-free 1/4" DN6 A1 Series Swing Couplings provide a fast and easy connection and guarantee free flow in a compact, easy to manage design. A simple turn activates an air vent to provide ventilation and safety to the hose. These new-generation Couplings are available in nominal sizes DN6 - DN11, DN6 featured here, and are compatible with most common plug systems (parts listed on this page fit the plug style pictured). They meet safety standard requirements and earned certificates listed. Increase the safety and efficiency of your operations and reduce your energy consumption with this economical choice. "Safely Swing to Connect!".

  • Valve-Free 1/4 Inch (in) DN6 B1 Series Swing Couplings

    These valve-free 1/4" DN6 B1 Series Swing Couplings provide a fast and easy connection and guarantee free flow in a compact, easy to manage design. A simple turn activates an air vent to provide ventilation and safety to the hose. These new-generation Couplings are available in nominal sizes DN6 - DN11, DN6 featured here, and are compatible with most common plug systems (parts listed on this page fit the plug style pictured). They meet safety standard requirements and earned certificates listed. Increase the safety and efficiency of your operations and reduce your energy consumption with this economical choice. "Safely Swing to Connect!".

  • Valve-Free 3/8 Inch (in) DN8 D Series Swing Couplings

    These valve-free 3/8" DN8 D Series Swing Couplings provide a fast and easy connection and guarantee free flow in a compact, easy to manage design. A simple turn activates an air vent to provide ventilation and safety to the hose. These new-generation Couplings are available in nominal sizes DN6 - DN11, DN8 featured here, and are compatible with most common plug systems (parts listed on this page fit the plug style pictured). They meet safety standard requirements and earned certificates listed. Increase the safety and efficiency of your operations and reduce your energy consumption with this economical choice. "Safely Swing to Connect!".

  • Valve-Free 3/8 Inch (in) DN8 E Series Swing Couplings

    These valve-free 3/8" DN8 E Series Swing Couplings provide a fast and easy connection and guarantee free flow in a compact, easy to manage design. A simple turn activates an air vent to provide ventilation and safety to the hose. These new-generation Couplings are available in nominal sizes DN6 - DN11, DN8 featured here, and are compatible with most common plug systems (parts listed on this page fit the plug style pictured). They meet safety standard requirements and earned certificates listed. Increase the safety and efficiency of your operations and reduce your energy consumption with this economical choice. "Safely Swing to Connect!".

Product Catalog