• CTB-band-and-spring-clamps
  • UNICLAMPS™ Stainless Steel Constant Tension Band Clamps

    Spring-Action Stainless Steel UNICLAMPS™ provide constant leak proof security for low pressure applications in applications requiring Stainless Steel. Their wide 6-9mm band-width ensures improved clamping action without hose damage, and a low cost solution for high volume production.

  • Constant Tension Band Clamps

    Constant Tension Bands are the ideal fasteners for hose-spigot connections which are submitted to extreme temperature changes, or which tend to "slip away" under pressure of the clamp. This version is pre-opened and pre-positioned on the hose. These spring band clamps are quick to assemble and easy to install and their integrated spring retaining mechanism provides a continuously readjusting dynamic tightening effect. They are available in band widths of 12 and 15 mm, and will accommodate nominal diameters from 13 up to 80 mm.

  • Pre-Opened Constant Tension Band Clamps

    Pre-Opened Constant Tension Bands are the ideal fasteners for hose-spigot connections which are subject to extreme temperature changes, or which tend to "slip away" under pressure of the clamp. This version is secured by a small plastic clip. After slipping the clamp onto the hose, this clip can be easily removed by hand. Pre-opened, (and if desired, pre-positioned on the hose) these spring band clamps are quick to assemble and easy to install. Their integrated spring retaining mechanism provides a continuously readjusting dynamic tightening effect. They are available in band widths of 12 and 15 mm and will accommodate nominal diameters from 13 up to 80 mm.

  • Pre-Opened Constant Tension Band Clamps with Plastic Clip

    Pre-Opened Constant Tension Bands are the ideal fasteners for hose-spigot connections which are subject to extreme temperature changes, or which tend to "slip away" under pressure of the clamp. This version is secured by a small plastic clip. After slipping the clamp onto the hose, this clip can be easily removed by hand. Pre-opened, these spring band clamps are quick to assemble and easy to install. Their integrated spring retaining mechanism provides a continuously readjusting dynamic tightening effect. They are available in band widths of 12 and 15 mm and will accommodate nominal diameters from 13 up to 80 mm.

  • Stepless® Self-Compensating Constant Tension Clamps

    Stepless® Self-Compensating Constant Tension Clamps are specifically developed to permanently stop cold leaks with black EPDM or soft silicone coolant system hoses on diesel or other engines. Their narrower band width & precise tongue-in-groove stepless interior, coupled with a low installation torque, achieves a strong uniform 360º seal. The preloaded spring tension effectively compensates for common coolant leakage during thermal cycle changes.

  • Self-Compensating Screw Drive Constant Tension Band Clamps

    Self-Compensating Screw Drive CTB Clamps eliminate "cold flow" leakage by shutting off the leak paths. These clamps provide the self-adjusting band you need for a dependable seal, even in the coldest conditions. Our standard version offers a lined 9/16" wide stainless steel band with a 5/16" hex-head screw.

  • Torro® Worm Gear Clamps with Integrated Springs

    Torro® Worm Gear Clamps with Integrated Springs add an automatic self-adjusting constant tension to the 9 or 12mm asymmetric worm drive clamp. Tightening the screw loads the spring with enough clamping force to ensure a long-lasting automatic re-tensioning effect, even in very low temperatures. The self-adjusting radial clamping force achieved makes these ideal for applications under extreme temperature changes (e. g. charged air) or for the retention of hoses with a tendency of "creeping" (hose relaxation). They are particularly suited to connecting cooling and heating hoses.

  • Double Wire Constant Tension Clamps

    Double Wire Constant Tension Clamps are self-compensating hose clamps made from specially processed premium grade spring wire, hardened and austempered to meet the performance requirements specified.

  • Single Wire Constant Tension Clamps

    Single Wire Constant Tension Clamps are self-compensating hose clamps made from specially processed premium grade spring wire, hardened and austempered to perform in low pressure applications where temperatures fluctuate.

  • Slim Design Single Wire Constant Tension Clamps

    Slim Design Single Wire Constant Tension Clamps are self-compensating hose clamps made from specially processed premium grade spring wire, hardened and austempered to perform in low pressure applications where temperatures fluctuate.

  • Handheld Clamp Pliers for Uniclamps™ Hose

    These handheld pliers are designed specifically to install UNICLAMP™ HOSE CLAMPS.

  • Make-A-Clamp Kits

    Each Make-A-Clamp Kit is a total maintenance worm gear clamp system in a box, from which can be made over 1000 SAE Sizes of clamps. Each kit consists of 1 continuous roll of Perforated 1/2"-wide Stainless Steel Banding plus adjustable Stainless Steel Aero-Seal Worm-Gear Assembly Fasteners with 400SS Hex Head Screws. These kits are superior to and more versatile than "crimp & buckle" banding and strapping fasteners, and are ideal for anyone who requires varying sizes of large re-usable worm gear clamps. Table below lists complete kits as well as replacement pieces for kits, as explained.

Product Catalog